显示 209-224 个结果（共 474 个结果）
Series F109 is remodification of series F101,economy and very light.
You can use series F109 butterfly valve when you want the sizeis as small as possible and the valve is used as cutting medium temporarily.
Compatible with GB,ANSI,DIN,BS,JIS flanges.
Available in size 1 1/2″to 12″.
Available in wafer type body.
Available with handles,manual gear operators,and electric or pneumaticactuators.
Its parts material is the same as series F101.
Series F235 is remodification of series F201.
Only compatible with ANSI 125/150 flanges.
Available in size 1″to 12″.
Available in wafer type model 15 and model 25,lug type model 20 and model 30 body.
One piece bodies are ribbed to assure high strength andminimum weight.
The large top flange provides a secure mountingarea for actuators.
Available with handles,manual gear operators,and electric or pneumatic actuators.
Series F235 is remodification of series F201.
Only compatible with ANSI 125/150 flanges.
Available in size 1″to 12″.
Available in wafer type model 15 and model 25,lug type model 20 and model 30 body.
One piece bodies are ribbed to assure high strength andminimum weight.
The large top flange provides a secure mountingarea for actuators.
Available with handles,manual gear operators,and electric or pneumatic actuators.
Series F235 is remodification of series F201.
Only compatible with ANSI 125/150 flanges.
Available in size 1″to 12″.
Available in wafer type model 15 and model 25,lug type model 20 and model 30 body.
One piece bodies are ribbed to assure high strength andminimum weight.
The large top flange provides a secure mountingarea for actuators.
Available with handles,manual gear operators,and electric or pneumatic actuators.
Technical requirements:
1.Design:AWWA C515
2.Nominal pressure:200PSI
3.Flange standard:ASME/ANSI B16.1 class 125 or ASME/ANSI B16.42 class 150 or BS EN1092-2 PN16 or GB/T9113.1
4.Groove standard:Metric or AWWA C606
5.Epoxy resin coating both inside & outside the body
Design & manufacture: API 609,ASME B16.34
Testing inspection: API 598
Face to Face dimensions:ANSI 609
Flanged end dimension: ASME B16.5,ASME B16.47A,ASME B16.47B,MSS SP-44,API 605
Butt-Welded end dimension: ASME B16.25
Series F401 valves designed to comply with BS5155.
Compatible with GB,DIN,BS and ANSI125/150 flanges.
Face to face according to ISO 5752 basic series 13(short)/DIN 3202 part 1 series F16.
Characteristic of series F401 valve is to splice the rubber liner on the body,the strength more highly and the seal more reliably for the seat.
There is O-ring casted on the seal surface of the seat,negates need for flange gaskets.
Available in size 2″to 48″.
Available with handles,manual gear operators,and electricor pneumatic actuators.
TECHNICAL SPECIFICATION
Design standard:API602；MSS-SP-117
Connection ends:
（1）Socket welded end:ANSI B16.11
（2）Screw end:ANSI B1.20.1
（3）Butt-welded end:ANSI B16.25
（4）Flange end:ANSI B16.5
Face to face dimension:ASME B16.10
Flanged ends:ASME B16.5
Welded ends:ASME B16.25
Test & inspection:API598
技术规范TECHNICAL SPECIFICATION
设计标准Design standard:API602；MSS-SP-117
连接端Connection ends:
（1）承插焊Socket welded end:ANSI B16.11
（2）螺纹Screw end:ANSI B1.20.1
（3）对焊Butt-welded end:ANSI B16.25
（4）法兰Flange end:ANSI B16.5
结构长度Face to face dimension:ASME B16.10
连接法兰Flanged ends:ASME B16.5
对焊连接Welded ends:ASME B16.25
式验与检验Test & inspection:API598
Design and Manufacture:JB/T8691,MSS SP-81
Face to face:GB/T15188.2,TAPPI TIS 405.8
Flange ends dimension:ANSI B 16.5,GB/T79-94
Inspection and Test:MSS SP-81,GB/T 13927
